Здравствуй! Из какого города?

The answer to all questions is yes. Can be rotated in any direction. Nothing will break. Need one inverter per box.

Amazing! How did you disconnect the front driveshaft? As far as I understand, this differential between axis is a planetary torsen and most likely it cannot be used without symmetrical load along the axes. Otherwise it will wear out quickly.

Update: I watched you project page. Now understand.

I was able to use the standard firmware for 450h. All values and temperatures are read.

Haven't hooked up the electrics yet. Packet format is definitely 450h.

Date of manufacture 13 year 6 month?

3TmUaAgcK5c.jpg

My inverter without cap module.
BjXpbWqOQl4.jpg

Join only through these holes to the high-voltage side. The negative terminal can be started from the back. But it's better this way

The procedures are described below for the inverter from ...

Table for the connector that goes directly to the inverter board. I don't have an external connector to the inverter so I had to cut the wires. I'll check the release date later. The pinout is the same for both left and right hand drive and most likely for different years of manufacture. Then above ...

The best way to verify the pinout is to check the 40 pin connector. All the colors in the ls600h manual match those that I saw when I made the wire adapter. Attach a photo of the connector with pin numbering. In fact, this is a diagram for the mom connector, just mirrored.

Soon I will be able to ...