Yeah. It was the power supply. Thanks.

Ah ok. I kept my settings the same, but installed V2.15A. The sound I'm getting doesn't seem right (hopefully the link works), on top of the judder.
Would you mind scanning my settings in case I've missed something. I've attached the json file.
If it's not the settings, I'll go back and recheck ...

Forgot to ask. Does the IS300H bug apply to older firmware also? Eg V2.15A?

Thanks. That's helped! I'll sit tight for the new release. Much appreciated.

Hello, and happy new year.

Looking for some guidance on getting an initial test spin with the L210.

Ver 2.20A
IS300H inverter and eCVT
RX450H throttle - DENSO 78110-33011

Had a throttle12diff error with my prius pedal, so switched to above (both eBay buys). No lasterr with the latter. Spot value ...

Ah, thanks. That's very helpful to know!

Ah. Intersting. I'm currently using the RX450 pedal. But used the below values. Have I adjusted the values incorrectly? If this is more a zombieverter settings issue, I'll send a separate post re that instead if need be.

Prius
Potmin = 504 so using 515
Potmax = 2748 so using 2735
Pot2min = 984 so ...

Yeah, 5V. I used my bench power device to supply.
I got the specs from attached. Unless I'm reading them wrong.

I only ask, since I get an throttle12diff error with the prius pedal, and no torque request with other (although, this will probably end up being a separate post if the throttles are ...

Hello

Is it possible to get a sense check on whether I’m interpreting my voltage readings correctly?

I’m was thinking I have a throttle problem, but seems strange both my secondhand purchases have issues.

Specifications vs what I’m measuring:

Prius Throttle
P/n: 78120-47050
Sensor 1
Fully ...

Many thanks. Double-checked PINs!
Apologies. I'm new to tracking PCB voltage drops (what follows will show it). Are we talking AMS117-3.3V (IC4) for 3v3 and XL1509-5.0E1 (IC11) for 5v?
One thing to note is my power unit was on constant voltage, and the amps drawn kept flicking between 1.5 ams and 0 ...

Hello

Does anyone know what my options would be if I'm not getting activity lights when applying 12v to pin 56 (and ground to 55).

I'm only getting activity when I'm connected to the wifi module via USB cable. (Through this, I can access the web interface).

Best
Michael

Great. Thanks for that. Good to know!

Hello

Noobie here. Have been shovelling so much information from this forum my head's about to burst! Really enjoying it so far!

Quick general question on purchasing. When buying a motor and inverter on ebay (or anywhere), what measures can you take to ensure you're not buying a "dud"?

Or, like ...