Getting this board made up at moment,
And batman chip placed on it, so can swap between porotype boards
Then hopping to look at reading data once I get some hardware

JLCPCB have this transformer in stock :
https://datasheet.lcsc.com/szlcsc/YDS-13F-39MNL_C115949.pdf
Any thoughts on compatability?


@Jack Bauer - How did you get on using that alt part for ISO SPI chip ?
(Did it work ok, or we best to keep to first one)


I'm just about start discovery on coms ...

Found the issue, was using wrong frequency with CAN messages
So when inverter turned on it classed and killed all the messages on the bus

But worth a note to make sure you have correct can terminators when start going longer distances.
For this one I manged to just go shield to inverter plug with ...

Hi,
Im playing about with a Nissan Leaf Gen1
And want to see if can direct connect to CAN on the Leaf inverter and watch & send messages.

Got two uno sending happy between then selves using CAN module.
But when I power up the inverter, then I start to get CAN send error on the uno
And not seeing ...