UDCmin is set to 10, it is not using a Shunt so set it to 0.
Search found 1326 matches
- Wed May 08, 2024 5:59 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombie and GS450H connected but no spin
- Replies: 7
- Views: 157189
- Wed May 08, 2024 5:07 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombie and GS450H connected but no spin
- Replies: 7
- Views: 157189
- Wed May 08, 2024 4:28 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombie and GS450H connected but no spin
- Replies: 7
- Views: 157189
Re: Zombie and GS450H connected but no spin
where is the .JSON with the parameters?
- Wed May 08, 2024 3:47 pm
- Forum: General
- Topic: CAD Models
- Replies: 9
- Views: 1295
Re: CAD Models
https://global.revopoint3d.com/en-uk/pages/portable-3d-scanner-pop3 one of these. Thanks for the heads up! I'll ready my disappointment.... hahahahahaha. Thats an entry level POS. its is priced accordingly 519 gbp you will struggle hard. here is a good review https://www.youtube.com/watch?v=YNpmpQm...
- Wed May 08, 2024 2:01 pm
- Forum: General
- Topic: CAD Models
- Replies: 9
- Views: 1295
Re: CAD Models
Get ready for a really steep learning curve. Which scanner you borrowing?Jacobsmess wrote: ↑Wed May 08, 2024 1:52 pm I'll be borrowing a high quality 3d scanner soon so will scan everything I've got so far.
- Wed May 08, 2024 1:38 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombieverter looses WiFi connection when trying to update
- Replies: 5
- Views: 293
Re: Zombieverter looses WiFi connection when trying to update
its not swd update... this is covered many times in videos and the forum
You need the other update.
You need the other update.
- Wed May 08, 2024 12:37 pm
- Forum: General
- Topic: CAD Models
- Replies: 9
- Views: 1295
Re: CAD Models
I have now uploaded the GS450h Gearbox and Inverter I scanned
- Wed May 08, 2024 9:53 am
- Forum: Nissan
- Topic: Zombieverter Leaf throttle code
- Replies: 9
- Views: 1546
Re: Zombieverter Leaf throttle code
Im Hoping to get some logs this weekend but in the mean time im going to change 0x1dc as suggested- is it just byte [1] I need to change or [1] & [2]? I cannot quite figure out the cryptic message in the .cpp comments "cryptic" because its just copy paste from a log. image.png Here is...
- Tue May 07, 2024 10:17 pm
- Forum: Charging
- Topic: BMW i3 CCS/charge port controller
- Replies: 1205
- Views: 5865045
Re: BMW i3 CCS/charge port controller
Type 1 LIM does not lock Charge Inlet when AC Charging: -the switch in the charging handle is also the unlock trigger for the catch on the handle. Some EVSEs with tehered type 1s do not have any other way to stop charge. Type 2 LIM locks Charge Inlet when DC Charging: -required by charging standards...
- Tue May 07, 2024 11:59 am
- Forum: Battery Managment (BMS)
- Topic: Engovis EVS-BMS - still available? And any place ship to North America?
- Replies: 9
- Views: 4704
Re: Engovis EVS-BMS - still available? And any place ship to North America?
Vero Electric used to do Simp-BMS distribution in the USA. Since ending the product they have focused on doing their on product.mustardveil wrote: ↑Tue May 07, 2024 1:46 am Hello I am a new member. Is this a reputable place to buy?
Always good experience with Reider (owner of Vero-Electric) and never had bad feedback from customers.
- Sun May 05, 2024 12:49 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombie gives no power to Inverter pin
- Replies: 2
- Views: 14932
Re: Zombie gives no power to Inverter pin
It is a LS (low side) or a pull to ground pin.
So you need to wire it as such, 12V to the relay other side to the pin.
So you need to wire it as such, 12V to the relay other side to the pin.
- Sat May 04, 2024 12:25 pm
- Forum: Projects
- Topic: [DRIVING] BMW Z3
- Replies: 348
- Views: 222012
Re: [WIP] BMW Z3
Looks like potnom oscillates at the same time? So software based issue and the inverter is just doing as commanded? No these are just symptoms, alot of testing has been done. The issue is the IS300h and GS450h have a quite a bit of slop/delay in things. This creates all sorts of havoc on tuning reg...
- Wed May 01, 2024 9:06 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombie not going into Run mode SOLVED
- Replies: 22
- Views: 108844
- Wed May 01, 2024 4:06 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombie not going into Run mode SOLVED
- Replies: 22
- Views: 108844
Re: Zombie not going into Run mode
So if you switch the pin states while plotting them do you see them hang?
It sounds like you might have broken something or JLCPCB manufacturing errors are causing all sorts of hick ups.
It sounds like you might have broken something or JLCPCB manufacturing errors are causing all sorts of hick ups.
- Wed May 01, 2024 2:39 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombie not going into Run mode SOLVED
- Replies: 22
- Views: 108844
Re: Zombie not going into Run mode
Permanent 12V T15/Igniton 12V/active Start signal 12V/actve No throttle Errors, so resting Pot is over potmin. Also Pot is not pressed No UDC errors, so udclim not triggered and udcsw has been passed or reached Ofcourse you can also fail precharge, but you are not measuring udc. You must be missing ...
- Wed May 01, 2024 1:10 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombie not going into Run mode SOLVED
- Replies: 22
- Views: 108844
Re: Zombie not going into Run mode
Why is your udclim zero?
Any stored errors or reported errors in the spot values?
Any stored errors or reported errors in the spot values?
- Wed May 01, 2024 10:41 am
- Forum: Vehicle Control (VCU)
- Topic: Zombie not going into Run mode SOLVED
- Replies: 22
- Views: 108844
Re: Zombie not going into Run mode
The inverter? You mean zombie not going into run mode right?
UDCsw is set to 0 which is correct.
It is possible the Vehicle is not working right when set to classic, I will look into this. Please try BMW E31 or E46.
Are you getting any errors related to throttle?
UDCsw is set to 0 which is correct.
It is possible the Vehicle is not working right when set to classic, I will look into this. Please try BMW E31 or E46.
Are you getting any errors related to throttle?
- Wed May 01, 2024 8:56 am
- Forum: Vehicle Control (VCU)
- Topic: Zombieverter or Lexus GS450h VCU that is the question.
- Replies: 47
- Views: 96763
Re: Zombieverter or Lexus GS450h VCU that is the question.
POST a .JSON if you want help with settings or are having troubles.
- Fri Apr 26, 2024 9:40 pm
- Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
- Topic: MLBEvo DBC & LIN Files
- Replies: 19
- Views: 5274
- Wed Apr 24, 2024 12:06 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 254800
Re: Simp BMS
I can look at adding the saftey box into the EVS-BMS supported ones. Yes I do not know if the Sbox can live on the same bus as the battery modules and still work. Luckily the EVS-BMS has two CAN busses.
- Tue Apr 23, 2024 1:24 pm
- Forum: Tesla
- Topic: Changing Acceleration Profile while running
- Replies: 3
- Views: 464
- Thu Apr 18, 2024 1:21 pm
- Forum: General
- Topic: Reverse engineering OEM Hardware
- Replies: 12
- Views: 1091
Re: Reverse engineering OEM Hardware
If the diodes fail, it means they are outside of their design operational window. Thus any other components on those sense lines will be hit hard by what ever voltage caused that failure. She if fubar, you never gotten it reverse engineered to a point where you understood what it was saying. So this...
- Thu Apr 18, 2024 1:20 pm
- Forum: Projects
- Topic: [WIP] Mercedes 310E (310D campervan) - GS450H/GS300H
- Replies: 162
- Views: 96402
Re: [WIP] Mercedes 310E (310D campervan) - GS450H/GS300H
If the diodes fail, it means they are outside of their design operational window. Thus any other components on those sense lines will be hit hard by what ever voltage caused that failure. She if fubar, you never gotten it reverse engineered to a point where you understood what it was saying. So this...
- Tue Apr 16, 2024 11:52 am
- Forum: Vehicle Control (VCU)
- Topic: 2013 leaf pdm zombie vcu
- Replies: 14
- Views: 3938
Re: 2013 leaf pdm zombie vcu
I'm still struggling to find out the WHY in my setup not working. You try this yet? There are people who have the setup working successfully with a full leaf stack and stock Zombie firmware. You could try making it work without talking to the BMS to start. Just to prove it works before making your ...
- Tue Apr 16, 2024 9:47 am
- Forum: Mitsubishi
- Topic: Can you identify this Outlander item?
- Replies: 6
- Views: 685
Re: Can you identify this Outlander item?
https://www.ebay.co.uk/itm/314587925940
It is this one, it is an additional DCDC used for certain extra features it was not standard on all PHEVs
This could also be the option AC output inverter.
It is this one, it is an additional DCDC used for certain extra features it was not standard on all PHEVs
This could also be the option AC output inverter.