Outlander VCU - Rear inverter, Charger and BMS

Mitsubishi hybrid drive unit hacking
arber333
Posts: 3660
Joined: Mon Dec 24, 2018 1:37 pm
Location: Slovenia
Has thanked: 145 times
Been thanked: 368 times
Contact:

Re: Outlander VCU - Rear inverter, Charger and BMS

Post by arber333 »

midway wrote: Fri Aug 08, 2025 9:36 am I also noticed a small difference from replacing inverters. Newer ones give more torque.
Today i went to replace the inverter to test if newer had more torque.
I removed the cables and inverter itself. I replaced my older inverter P/N 9410A081 with newer model P/N 9410A163 from 2020. After a short drive later this evening it really seems the takeoff is somewhat more powerful.
Megane is quite a bit heavier than Mazda, 1800kg vs 1200kg and 400kg more is showing no matter how i go at the throttle code. I will elaborate later...
Post Reply