Will the controller board for a Tesla motor be able to send commands to my power steering pump on my Mini Cooper?
Required messages are:
CAS (key switch)- 0x130 - Terminal status
DSC - 0x1A0 - Vehicle speed - Impact on assistance
Engine ECU - 0x1D0 - Engine Run
Sending CAN Buss comands
-
tom91
- Posts: 2754
- Joined: Fri Mar 01, 2019 9:15 pm
- Location: Bristol
- Has thanked: 264 times
- Been thanked: 717 times
Re: Sending CAN Buss comands
Not realy as these will need a crc and static frame info. Not what the OI CAN mapping is setup to do.