I am interested in the Boost Inductor, so have started a thread just to capture some of this data that may be useful to someone,
kind regards Johnspark
Prius Gen 3 Inverter Boost Inductor Electrical Aspects
-
johnspark
- Posts: 264
- Joined: Fri Apr 12, 2019 10:42 pm
- Location: Adelaide, South Australia
- Has thanked: 59 times
- Been thanked: 48 times
Re: Prius Gen 3 Inverter Boost Inductor Electrical Aspects
I have measured the inductance of this inductor to be using a DE-5000: 258.5uH @ 10kHz.
Measured the DC resistance using a DC current source to be: 0.141V / 8.77A = 0.016 ohms.
Measured the DC resistance using a DC current source to be: 0.141V / 8.77A = 0.016 ohms.
Re: Prius Gen 3 Inverter Boost Inductor Electrical Aspects
Mayby we can use this boost inductor with this project https://www.diyelectriccar.com/threads/ ... ger.36627/
-
arber333
- Posts: 3267
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 80 times
- Been thanked: 234 times
- Contact:
Re: Prius Gen 3 Inverter Boost Inductor Electrical Aspects
No, this was the barebones charger and it had a nasty habit of measuring battery voltage in between pauses. This caused lights flicker in house and other wierd sounds...wwojciech wrote: ↑Mon Aug 31, 2020 7:32 am Mayby we can use this boost inductor with this project https://www.diyelectriccar.com/threads/ ... ger.36627/
The charger that i lean to is EMW design, which is a derivative of upper one, but it has good serial control and isolated measurements. I run it for 7 years now in 3phase with very good results. Read up on the thread. Firmware is sort of open source....DOH!
https://www.diyelectriccar.com/threads/ ... ign.59210/
-
Bratitude
- Posts: 786
- Joined: Thu Jan 02, 2020 7:35 pm
- Location: Canada
- Has thanked: 60 times
- Been thanked: 176 times
- Contact:
Re: Prius Gen 3 Inverter Boost Inductor Electrical Aspects
any one have a part number?
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components