To use it you need to download this file https://raw.githubusercontent.com/jsphu ... emote.html and upload it to your wifi module via the "Update" facility. You may also update index.html (It just adds a link to remote.html)
UPDATE: modules since 2021 already have that file.
In order for this module to work, http://192.168.4.1/remote.html must be opened on a device that is connected to both the inverter AND the internet. There are multiple ways to achieve this. Pick the one that suits you best.
- Open it on a smart phone that is connected to the internet via mobile data and to the inverter via wifi. Make sure your phone never enters standby mode during the support session. Also make sure you can still access the inverter after connecting to mobile data. Some devices don't allow that.
- Open it on a regular PC/laptop that is connected to the internet via Ethernet and connected to the inverter via wifi
- Make the inverter wifi module connect to your local hotspot and access this wifi interface via the hotpot assigned IP address