Page 1 of 1
DC/DC Converter on Voltage Sensor
Posted: Mon Apr 06, 2020 2:39 am
by Shaharov
Just wondering what DC/DC conveter is used on the voltage sensor. I can't find it on the schematic or any web pages.
Thanks
Jonathan
Re: DC/DC Converter on Voltage Sensor
Posted: Mon Apr 06, 2020 9:51 pm
by Isaac96
Hi,
The Rev2 kit uses the RKE-0505S/H according to the BOM I received with my kit from Johannes.
You're referring to this board, correct?
https://openinverter.org/wiki/Sense_Boards
Re: DC/DC Converter on Voltage Sensor
Posted: Mon Apr 06, 2020 10:34 pm
by Shaharov
Yes... thats the board. Thanks, Been bugging me.
Re: DC/DC Converter on Voltage Sensor
Posted: Tue Apr 07, 2020 11:11 am
by arber333
Hi in my experience i would recommend Murata NME0505SC since this DCDC can spend infinite time shorted. Just in case...
Re: DC/DC Converter on Voltage Sensor
Posted: Tue Apr 07, 2020 11:35 am
by Shaharov
Good to know.... I usually look into alternatives when I look at a design