openinverter forum

Hi.
Anyone that has managed to build / modify the manifold to create a coolant delete?
I'm very interested in this and will probably try to make this but would realy like some input from anyone that has acctually done it (or made any 3D models).

Thanks
// Per

There is a good thread on the facebook group "Tesla Swapped EVs" about this.

It sounds as though everyone is doing the coolant delete now rather than trying to get a new seal to actually seal.

https://www.facebook.com/groups/1258821 ... 7S9Ucbxw6v

My LDU has the same issue. Pitted shaft.. so I am also eyeing the coolant delete option. The speedi sleeve sounds like another option but I've heard even that wont last...

This thread also has alot of info:

https://teslamotorsclub.com/tmc/thread ... ir.274163/