Hi All. I got my hand on "faulty" MG5 on board charger (EP2CCU6625A).
I did not have a way to tedt, so I decided to look inside
Not the best idea ever, as due to the cover being glued on, it was hard work and i have damaged the unit a bit.
So I'm sharing info/pics, so you don't have to repeat my mistake;-)
Just need to upload the pictures...
Bit later I will try to test if any of the functions (charging/DC-DC/V2L) are still working.
Top with cover:
Top-less
Bottom with cover:
Bottom without cover:
Connector side:
Teardown MG MG5 combined charging init
- uhi22
- Posts: 648
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 93 times
- Been thanked: 428 times
Re: Teardown MG MG5 combined charging init
Did Damien have the same type on the bench? He did not open it, but was successfully control it by replaying CAN messages. He published a video about this in the last weeks.
[Edit] Link to video:
[Edit] Link to video:
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22
Re: Teardown MG MG5 combined charging init
I think it is the same unit, but Damian will have to confirm is unit is also EP2CCU6625A.
Once I test what is still working, I will probably try to get the PCB off to dig deeper (especialy if nothing is working).
Once I test what is still working, I will probably try to get the PCB off to dig deeper (especialy if nothing is working).