interface problem tesla sdu with esp32 canlite module
- uhi22
- Posts: 648
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 93 times
- Been thanked: 428 times
Re: interface problem tesla sdu with esp32 canlite module
I'd like to see a video of this.
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22
- johu
- Site Admin
- Posts: 5836
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 162 times
- Been thanked: 1055 times
- Contact:
Re: interface problem tesla sdu with esp32 canlite module
Don't know why gdb is launched.
The update screen indicates that the file system (spifs) is missing
The update screen indicates that the file system (spifs) is missing
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
- uhi22
- Posts: 648
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 93 times
- Been thanked: 428 times
Re: interface problem tesla sdu with esp32 canlite module
Maybe one last try before appying 400V to the ESP ( )
I used arduino IDE to flash all the things, this is a little bit complicated, but I found a way. Described here: https://github.com/jsphuebner/esp32-web ... n_notes.md
I used arduino IDE to flash all the things, this is a little bit complicated, but I found a way. Described here: https://github.com/jsphuebner/esp32-web ... n_notes.md
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22