Hello,
I have a 2020 Tesla Model 3 Long Range, I have connected a Raspberry Pi 0 W, to the CAN-BUS socket in the centre console behind the driver and passenger seats. Using SavvyCAN I can see data packets and I have download the Model3CAN.dbc which provides some translation.
Specifically I am trying to identify the following data:
Left and Right signal indication.
Brakes used.
Reverse engaged.
I haven't been able to identify these in the data I've sniffed, the data rate for this port is 500000 baud. Is there another socket in the car I should connect to and look at and what would be the correct baud rate ?
Thank you,
Simon