Hi,
did anyone actually take a Gen2 Charger apart?
I have 2 with one bad phase each here and thought I could make one perfect charger out of them. But damn, how do you get the phase modules out there?
I removed the cooling plate, but no additional screws there.
Probably need to unsolder the phase control module. But that would kill that project, I guess.
Thanks,
Marco
Teardown Tesla Gen2 10 kW charger
-
- Posts: 3270
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 80 times
- Been thanked: 238 times
- Contact:
Re: Teardown Tesla Gen2 10 kW charger
Well yes. If you would use both of them and only turn on individual phases... you could still use 3 phases.levelnull wrote: ↑Wed Jan 03, 2024 10:53 am Hi,
did anyone actually take a Gen2 Charger apart?
I have 2 with one bad phase each here and thought I could make one perfect charger out of them. But damn, how do you get the phase modules out there?
I removed the cooling plate, but no additional screws there.
Probably need to unsolder the phase control module. But that would kill that project, I guess.
Thanks,
Marco
Re: Teardown Tesla Gen2 10 kW charger
No, thats not a good option I guess
needs too much space and weight.
needs too much space and weight.
-
- Posts: 3270
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 80 times
- Been thanked: 238 times
- Contact:
Re: Teardown Tesla Gen2 10 kW charger
There is a video from EVclinic where Vanja is refurbishing failed diodes on one gen3 unit:
Maybe you can contact him and ask for price of repair?
This one is for Gen2 i think...