We have the VCU up and running on the laptop, and power to the motor, 100v I think, but it doesn't turn over,
It seems the Firmware is only for Gen1, Where to find the updated firmware for Gen2 ZE1 motors?
Zombie Firmware for ZE1 e+
-
- Posts: 2
- Joined: Wed May 31, 2023 6:38 pm
-
- Posts: 475
- Joined: Thu Jul 04, 2019 6:35 pm
- Location: Somerset, UK
- Has thanked: 43 times
- Been thanked: 109 times
Re: Zombie Firmware for ZE1 e+
That gen1 module will run any gen leaf as far as I am aware. I have personally seen it running up to 2019 leaf inverters and motors no problem.
I think the issue you have is voltage, pretty sure the lead needs a few more volts to run via canbus.
I think the issue you have is voltage, pretty sure the lead needs a few more volts to run via canbus.