can some any one provide some what the internal diameter of the coolant ports on the pcs are?
im working on some adapters and dont have a pcs near me
PCS coolant port measurements [SOLVED]
-
Bratitude
- Posts: 784
- Joined: Thu Jan 02, 2020 7:35 pm
- Location: Canada
- Has thanked: 59 times
- Been thanked: 176 times
- Contact:
PCS coolant port measurements
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
-
nkiernan
- Posts: 509
- Joined: Mon Feb 24, 2020 8:59 pm
- Location: Ireland
- Has thanked: 284 times
- Been thanked: 65 times
Re: PCS coolant port measurements
I have one on the bench at home so can grab some dims later this evening
-
P.S.Mangelsdorf
- Posts: 772
- Joined: Tue Sep 17, 2019 8:33 pm
- Location: Raleigh, NC, USA
- Has thanked: 96 times
- Been thanked: 96 times
Re: PCS coolant port measurements [SOLVED]
I measured one I have in storage with a digital caliper.
Inside diameter is 22mm, but flares near the opening to 23.7mm
Outside diameter is 26.1mm, appears to be fairly straight, except for the bead, which is 30.4mm outside diameter.
Inside diameter is 22mm, but flares near the opening to 23.7mm
Outside diameter is 26.1mm, appears to be fairly straight, except for the bead, which is 30.4mm outside diameter.
If at first you don't succeed, buy a bigger hammer.
1940 Chevrolet w/ Tesla LDU - "Shocking Chevy" - Completed 2023 Hot Rod Drag Week
1940 Chevrolet w/ Tesla LDU - "Shocking Chevy" - Completed 2023 Hot Rod Drag Week