FYI, I just published an STL on Thingiverse for 3D printing a replacement SDU MX150 Female Connector. This part is very brittle and tends to break easily. As far as I know, replacements are unavailable, so I decided to make my own. It screws right into the aluminum case, and there is no need for the blue retaining clip. I've printed a few so far and they seem to work well, so I decided to share. I recommend using ABS/ASA filament, 100% infill, and a .25mm nozzle for best results. Takes about 10 hours to print on a Prusa MK3S.
Please let me know what you think, and enjoy!
https://www.thingiverse.com/thing:6230844
SDU MX150 Female Connector STL
- johu
- Site Admin
- Posts: 5791
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1025 times
- Contact:
Re: SDU MX150 Female Connector STL
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9