Hello, folks.
I'm sure it's a silly question, but maybe somebody wonders about the same...
Could somebody please settle the correct CCS pinout for me? The pinouts in the below 2 options are mirrored - some show DC+ on the right, others - DC+ on the left. Similar goes for the CP and PP signals.
All pictures below are or the sockets\inlet\vehicle side.
I think it should be option 1.
Option 1:
Option 2:
CCS connectors pinout
-
- Posts: 164
- Joined: Sun Jan 03, 2021 6:12 am
- Has thanked: 48 times
- Been thanked: 17 times
- uhi22
- Posts: 648
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 93 times
- Been thanked: 428 times
Re: CCS connectors pinout
Looking from outside to the vehicle inlet, on the right side is DC+ and CP. This is what I can confirm from various CCS2 test setups. This would match option 1 above.
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22