Share parameters?

Topics concerning the Tesla front and rear drive unit drop-in board
Post Reply
User avatar
Joxson
Posts: 15
Joined: Tue Oct 22, 2019 6:29 am
Location: Sweden

Share parameters?

Post by Joxson »

Hi!
Is it anyone who can share a working set of parameters for the LDU sport unit?
Im quite new at tuning and Im looking in to getting a little head start ;)

Thanks in advance!
Best Regards
Joachim Westerlund :)
User avatar
bexander
Posts: 835
Joined: Tue Jun 16, 2020 6:00 pm
Location: Gothenburg, Sweden
Has thanked: 63 times
Been thanked: 89 times

Re: Share parameters?

Post by bexander »

Seem like these parameters are a bit old but might get you going.
https://openinverter.org/parameters/

Try the search function on the forum as well, specially in the Tesla section.
P.S.Mangelsdorf
Posts: 772
Joined: Tue Sep 17, 2019 8:33 pm
Location: Raleigh, NC, USA
Has thanked: 96 times
Been thanked: 96 times

Re: Share parameters?

Post by P.S.Mangelsdorf »

Here are the two Tesla parameter threads:
viewtopic.php?t=195&hilit=parameter+thread
viewtopic.php?t=126&hilit=ldu+tuning

I'd generally say start with Jon Volk's tune, and tweak from there. I believe the set attached here is his most recent. If I remember correctly he was on a base LDU, but its probably a good starting point for your Sport LDU as he was right to the limit of what a base can take.

I've also attached my most recent parameter dump (just called params). On my base LDU, I'm still having an overcurrent issue when going WOT with a full battery pack. I'm still trying to find a tune that eliminates that while maintaining the violence. There is a chance I've got some inverter damage, but unknown at this time. This was on firmware v5.20
Attachments
params.json
(1.49 KiB) Downloaded 41 times
JonVolk TESLA_PARAMS 2022-05-29.json
(1.47 KiB) Downloaded 50 times
If at first you don't succeed, buy a bigger hammer.

1940 Chevrolet w/ Tesla LDU - "Shocking Chevy" - Completed 2023 Hot Rod Drag Week
User avatar
Joxson
Posts: 15
Joined: Tue Oct 22, 2019 6:29 am
Location: Sweden

Re: Share parameters?

Post by Joxson »

Thanks for the replies! Will upload them and tune after that!
Best Regards
Joachim Westerlund :)
User avatar
catphish
Posts: 955
Joined: Fri Oct 08, 2021 11:02 pm
Location: Dorset, UK
Has thanked: 94 times
Been thanked: 179 times

Re: Share parameters?

Post by catphish »

On the topic of shared Tesla paramaters, please can someone (ie johu) change the tripmode on the official SDU and LDU paramaters? The current defaults are almost definitely responsible for some damaged hardware.
User avatar
Bratitude
Posts: 784
Joined: Thu Jan 02, 2020 7:35 pm
Location: Canada
Has thanked: 58 times
Been thanked: 176 times
Contact:

Re: Share parameters?

Post by Bratitude »

Sad nobody uses the pram data base :(
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
User avatar
catphish
Posts: 955
Joined: Fri Oct 08, 2021 11:02 pm
Location: Dorset, UK
Has thanked: 94 times
Been thanked: 179 times

Re: Share parameters?

Post by catphish »

Bratitude wrote: Thu Jun 22, 2023 11:28 am Sad nobody uses the pram data base :(
Unfortunately the param database is quite broken. I was planning to fix it but just never got time to do so :(
User avatar
Bratitude
Posts: 784
Joined: Thu Jan 02, 2020 7:35 pm
Location: Canada
Has thanked: 58 times
Been thanked: 176 times
Contact:

Re: Share parameters?

Post by Bratitude »

its such a good idea, the potential is there. forum sharing is such a mess
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
User avatar
johu
Site Admin
Posts: 5791
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 157 times
Been thanked: 1025 times
Contact:

Re: Share parameters?

Post by johu »

Yes, could use a rewrite. Would prefer more server side, less js.
https://github.com/jsphuebner/parameter-database

tripmode updated.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Post Reply