Help: The motor shakes, but does not turn! There is a lot of current!

tt1012 · Post by **tt1012** » Tue May 09, 2023 1:46 am

If I have any more questions!

I will come to the forum for consultation!

Thank you all!

Mhs · Post by **Mhs** » Tue May 09, 2023 9:58 am

I by no means an expert, however I suggest you to provide more details on your setup (motor and inverter details) to allow others to help you

Bigpie · Post by **Bigpie** » Tue May 09, 2023 10:19 am

Are you sure your motor phase wires are the correct order?

tt1012 · Post by **tt1012** » Tue May 09, 2023 2:13 pm

I have already solved this problem!

thank you!

But now I realize that my current sensor is not working! The voltage is normal!

1.6v。 But there has been no change in the data of il1 and il2!

And after I refueled, he remained in idle mode!

I can't control any speed!

tt1012 · Post by **tt1012** » Tue May 09, 2023 4:00 pm

Bigpie wrote: ↑Tue May 09, 2023 10:19 am Are you sure your motor phase wires are the correct order?

yes!

YouTube · Post by **johu** » Tue Sep 12, 2023 10:18 am

Please don't delete your original question as then it's less helpful for others and also report back how you solved the problem

Help: The motor shakes, but does not turn! There is a lot of current!

Help: The motor shakes, but does not turn! There is a lot of current!

Re: Help: The motor shakes, but does not turn! There is a lot of current!

Re: Help: The motor shakes, but does not turn! There is a lot of current!

Re: Help: The motor shakes, but does not turn! There is a lot of current!

Re: Help: The motor shakes, but does not turn! There is a lot of current!

Re: Help: The motor shakes, but does not turn! There is a lot of current!