Today, at the start, my bus refused to go. I looked at the web page - there is an error [8943] DESAT - STOP.
I want to understand what this error is and where there is a wiki on possible errors.
How to find out the error
- Renegate2020
- Posts: 51
- Joined: Tue Dec 01, 2020 6:20 am
- Location: Odessa UA
- Has thanked: 1 time
- Contact:
-
- Posts: 176
- Joined: Tue Aug 13, 2019 4:32 pm
- Location: Russia, Stavropol
- Has thanked: 14 times
- Been thanked: 5 times
Re: How to find out the error
Привет. This error occurs when the phase current is overloaded, or the signal level on the PB12 pin has changed from high to low or vice versa, depending on which controller you are using
- Renegate2020
- Posts: 51
- Joined: Tue Dec 01, 2020 6:20 am
- Location: Odessa UA
- Has thanked: 1 time
- Contact:
- Renegate2020
- Posts: 51
- Joined: Tue Dec 01, 2020 6:20 am
- Location: Odessa UA
- Has thanked: 1 time
- Contact:
Re: How to find out the error
Interested in the meaning of error 12164?
Maybe there is a section with decoding of error numbers?
Maybe there is a section with decoding of error numbers?
- johu
- Site Admin
- Posts: 5842
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 164 times
- Been thanked: 1062 times
- Contact:
Re: How to find out the error
12164 is the time when it occurred (multiply by x10 to arrive at ms after start).
Error list: https://openinverter.org/wiki/Errors
Error list: https://openinverter.org/wiki/Errors
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9