Mechanical design database wiki page: please contribute
Posted: Wed May 11, 2022 7:58 pm
iv started a Mechanical design database on the wiki
https://openinverter.org/wiki/Mechanica ... n_database
the idea here is to post anything from adapter plate deigns to 3d printable cable glands.
ideally things like adapter plates will have some standardized features, like a NEMA B-face bolt pattern.
this will make different parts cross compatible: one person makes a adapter plate for a outlander motor, and another for there fords 5speed transmission, both of these designs mate into a seamless assembly.
iv started making a table and will be filling it out with the current designs i have.
having multiple designs, for the same hardware, from different people, is encouraged. This helps weed out potential errors in dimensions.
https://openinverter.org/wiki/Mechanica ... n_database
the idea here is to post anything from adapter plate deigns to 3d printable cable glands.
ideally things like adapter plates will have some standardized features, like a NEMA B-face bolt pattern.
this will make different parts cross compatible: one person makes a adapter plate for a outlander motor, and another for there fords 5speed transmission, both of these designs mate into a seamless assembly.
iv started making a table and will be filling it out with the current designs i have.
having multiple designs, for the same hardware, from different people, is encouraged. This helps weed out potential errors in dimensions.
, I'll see what I can dig up.