Switched ADC BMS

Topics concerning OEM and open source BMSes
Post Reply
Leo M
Posts: 88
Joined: Fri Oct 30, 2020 9:48 am
Been thanked: 2 times

Re: Switched ADC BMS

Post by Leo M »

johu wrote: ↑Tue Mar 05, 2024 7:35 am Yes I will work on the software again, currently focusing on ccs.


What's the purpose of this sentence? Another translater bug?

Ok maybe leave a quick note if text is translated so it's not taken too literal
I wrote that it is probably not difficult to save my Can cards in the new firmware version.This is a useful option for everyone)))
Top
Jacobsmess
Posts: 494
Joined: Thu Mar 02, 2023 1:30 pm
Location: Uk
Has thanked: 254 times
Been thanked: 66 times

Re: Switched ADC BMS

Post by Jacobsmess »

Hey Johu,
any recommendations on a suitable wire-to-board connector for the 17pincell tap connection?
I've looked on JLCPCB and LCSC but neither seem to have something suitable to my inexperienced eyes. what is the max voltage rating required? do they need to be 400V rated or not?
failing a wire-to-board connection, what is the recommended alternative? I'm going to get JLCPCB to solder the boards up completely rather than mess up the boards with my sloppy soldering!
thanks
Top
Post Reply

Return to “Battery Managment (BMS)”