Hm, it could be that the conclusion above regarding the "EVSEStatusCode_text": "EVSE_NotReady" was wrong. I think I compared apples (alpitronic hypercharger) with pines (compleo). Just looked in an old compleo log (2023-04-05), also here we see EVSE_NotReady, but the cablecheck works fine afterwards. With the todays "fix", we hang in the ChargeParameterDiscovery until the timeout comes, this seems not to be a solution. I will roll this back. [Edit: Done,
https://github.com/uhi22/pyPLC/commit/b ... 7cf94af40d ]
The Porsche is stuck at the same position, as the Compleo was before: CableCheck reports "FAILED".
One more idea: Before the cable check, we must signalize StateC. Maybe this is broken or connected to a wrong pin or something.
The ABB have a different issue, the modem pairing seems to work only half-way, the modem does not respond to the GetKey request, which I use to find out, whether the modems are present. Maybe here a better strategy is necessary. [Edit: Now starting the SDP requests even if the GetKey does not work,
https://github.com/uhi22/pyPLC/commit/f ... 5216e88746 ]
Yes, the pcaps would make sense, hopefully celerons concept with the starter script also runs on the beaglebone.