No he must have replaced it with the DELETED text himself.
When I delete spammers I can delete their posts along with the user. Sometimes I delete users that have no posts and haven't been active for more than a year. But never ones that posted something
Tesla Large Drive Unit (LDU) Motor Teardown and maintenance
- johu
- Site Admin
- Posts: 5814
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 162 times
- Been thanked: 1042 times
- Contact:
Re: Tesla Large Drive Unit (LDU) Motor Teardown and maintenance
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Re: Tesla Large Drive Unit (LDU) Motor Teardown and maintenance
hello, I deleted the contents myself, Johan is developing the website and info. Hope that helps. Thanks
- asavage
- Posts: 331
- Joined: Sat May 14, 2022 10:57 pm
- Location: Oak Harbor, Washington, USA
- Has thanked: 282 times
- Been thanked: 104 times
- Contact:
Re: Tesla Large Drive Unit (LDU) Motor Teardown and maintenance
Bit of crossposting: coolant manifold plug of 6061:
https://www.myrav4ev.com/threads/anothe ... post-30941
Teaser:
Rotor temperature sensor/display:
https://teslamotorsclub.com/tmc/posts/8230849/
Teaser:
https://www.myrav4ev.com/threads/anothe ... post-30941
Teaser:
Rotor temperature sensor/display:
https://teslamotorsclub.com/tmc/posts/8230849/
Teaser:
- Boxster EV
- Posts: 441
- Joined: Fri Jul 26, 2019 9:32 pm
- Location: UK
- Has thanked: 36 times
- Been thanked: 29 times
Re: Tesla Large Drive Unit (LDU) Motor Teardown and maintenance
I’ve bitten the coolant delete bullet too. Just fitted this from Revolt Systems in California. My car is used as a Daily, so didn’t have the time to have off the road whilst the existing manifold was modified. Took about 2 hours to fit.
Re: Tesla Large Drive Unit (LDU) Motor Teardown and maintenance
What do you use for seal material (brownish on the maifold)?
And do you have any drawing or cad file for the plug you like to share?
Or possibly if you can sell a plug?
And do you have any drawing or cad file for the plug you like to share?
Or possibly if you can sell a plug?