Ok Guys, Im very new to ev conversions and i wouldnt know where to start myself but do you or anyone you know on here do custom EV or Hybrid conversion work on the likes of Porsche, Bentley or Aston Martin?
Im looking at buying myself a sports car but i run an EV charge-point installation business so i need to be practicing what i preach!:-)
Anyone you can pass me the details of or a link would be most appreciated
Chris
Bentley 6.0GT continental
-
- Posts: 2
- Joined: Tue Oct 05, 2021 1:18 pm
-
- Posts: 656
- Joined: Sat Oct 05, 2019 6:50 pm
- Location: Northern California, USA
- Been thanked: 1 time
- Contact:
Re: Bentley 6.0GT continental
Hmm.
Zelectric does 911s and 912s, their builds look clean.
Aston Martin themselves planned on doing conversions - they called it the 'Heritage EV' program, but news seems to have dried up on it.
Depending on your budget - there's a British company called 'Lunaz' which is doing classic Bentleys, Jaguars, Rolls Royces, etc. Their prices start at 300k for a Range Rover so a Bentley would be 500k at least.
All these seem to be for classics, as the newer cars get exponentially more complicated.
Zero EV does conversions on most anything and they're well respected around here.
Are you thinking classic or newer, and what sort of budget range do you have?
Zelectric does 911s and 912s, their builds look clean.
Aston Martin themselves planned on doing conversions - they called it the 'Heritage EV' program, but news seems to have dried up on it.
Depending on your budget - there's a British company called 'Lunaz' which is doing classic Bentleys, Jaguars, Rolls Royces, etc. Their prices start at 300k for a Range Rover so a Bentley would be 500k at least.
All these seem to be for classics, as the newer cars get exponentially more complicated.
Zero EV does conversions on most anything and they're well respected around here.
Are you thinking classic or newer, and what sort of budget range do you have?
- EV_Builder
- Posts: 1199
- Joined: Tue Apr 28, 2020 3:50 pm
- Location: The Netherlands
- Has thanked: 16 times
- Been thanked: 33 times
- Contact:
Re: Bentley 6.0GT continental
I'm doing a 2010 Panamera.
The newer the vehicle the more software hours you will need.
In my case no gearbox MCU and engine MCU.
The newer the vehicle the more software hours you will need.
In my case no gearbox MCU and engine MCU.
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
see http://www.wdrautomatisering.nl for bespoke BMS modules.
-
- Posts: 56
- Joined: Thu Dec 17, 2020 1:48 am
- Has thanked: 1 time
- Been thanked: 2 times
Re: Bentley 6.0GT continental
I'm not aware of anyone offering a hybrid swap but it is a project I have just started. I'd be happy to keep you updated as it progresses. My project is based on the 8hp hybrid transmission and should be (relatively) easily adapted to any vehicle using the standard 8hp or other zf transmissions.