Hi everyone,
Let's thank our forum member Vjkomix for sharing pictures of a Toyota Estima Inverter teardown & inspection. The inverter part # is G92A0-28010.
The nice thing about this car, it has 2 x powertrains:
A) one very similar to Prius Gen3 inverters and
B) an additional 3rd inverter to drive MG3 (rear axle motor).
The whole assembly upside down compared to how it is fitted on the car:
MG3 Inverter:
Unit upside down:
DC Capacitor built into the cover:
DC Capacitor 750V 2100uF:
MG1&MG2 Inverter - top view:
Logic board #F1759-30010, inverter MG1 & MG2, similar to Prius Gen3:
IPM MG1 & MG2, Power Board # F1789-33010:
My guess, buck/boost converter:
The control pcb is soldered to the PM:
Toyota Estima Inverter Teardown & Inspection
- Jora Karandas
- Posts: 6
- Joined: Sat Dec 22, 2018 10:34 pm
- Location: UK, RO, IT
- Contact:
- Jora Karandas
- Posts: 6
- Joined: Sat Dec 22, 2018 10:34 pm
- Location: UK, RO, IT
- Contact:
-
- Posts: 21
- Joined: Mon Apr 13, 2020 5:17 am
- Location: Geelong, Australia
Re: Toyota Estima Inverter Teardown & Inspection
oooh I'd love to get one of these, 2 inverters for each the front wheels and rear wheels for AWD EV plus the 3rd one for charging
Re: Toyota Estima Inverter Teardown & Inspection
If ur going to use this i would replace the thermal paste .
I have a how to on here for camry which will help from were u are now
I have a how to on here for camry which will help from were u are now
Re: Toyota Estima Inverter Teardown & Inspection
Hi pleasant good day
Can anyone say if their is a method of controlling this inverter assembly their is one available in my area atm with the Transaxle but I'm not finding enough information
Can this be controlled via zombie verter
Or a logic board..
Thanks in advance
Can anyone say if their is a method of controlling this inverter assembly their is one available in my area atm with the Transaxle but I'm not finding enough information
Can this be controlled via zombie verter
Or a logic board..
Thanks in advance