UPDATE:
Manual in the wiki: https://openinverter.org/wiki/GEN2
Download link: https://openinverter.org/files/stm32_charger.zip
Shop link: https://openinverter.org/shop/index.php ... duct_id=67
UPDATE2:
the firmware will be published as open source soon. If you want to grab it earlier jump on to patreon: https://www.patreon.com/openinverter
I have annoyed Damien by sending him outside in the freezing cold to test it in his BMW It works.
More specifically it features
- All features of the original firmware
- openinverter parameter handling via web interface
- openinverter spot value handling via web interface
- Over The Air update via bin file
- Plotting and logging
- DC current set point
- external CAN control
I have mapped out CHAdeMO so it will accept like this
Code: Select all
#0x102 - 8 - 0 udclimh udcliml idcspnt 0 canenable soc 0
It will also generate the 108 and 109 message CHAdeMO style.
The firmware won't be open sourced for now. Damien will probably put it on boards he sells off his shop and I will offer the binary via my shop for the likes of 20€ or so. I will put together a short manual before putting it up.