Hi Everyone.
I've been reading for a while, but this is my first post.
What is the length of the leaf motor shaft, to the tip, from the mating face of the gearbox? I don't have a motor in my hands yet and can't find the dimension anywhere.
Thanks!
Leaf motor output shaft length
-
JetJackson
- Posts: 1
- Joined: Wed Dec 23, 2020 4:38 pm
-
celeron55
- Posts: 776
- Joined: Thu Jul 04, 2019 3:04 pm
- Location: Finland
- Has thanked: 28 times
- Been thanked: 110 times
- Contact:
Re: Leaf motor output shaft length
I've marked it as 54mm in my notes. The splines start at about 13mm and reach about 46mm from the motor mounting face. This is for gen 2.