[DRIVING] 1978 VW T2 Camper

Tell us about the project you do with the open inverter
DaveH
Posts: 91
Joined: Sat Jun 13, 2020 9:04 am
Location: Hull, UK
Has thanked: 1 time
Been thanked: 8 times

Re: [DRIVING] 1978 VW T2 Camper

Post by DaveH »

CCS controller and inlet is in. Kit at eDubs posted a video before I picked her up.
IMG_0197.jpeg
Next I need to improve the brake pump with the vacuum sensor I got from Citini, then it will be time for an interior.
DaveH
Posts: 91
Joined: Sat Jun 13, 2020 9:04 am
Location: Hull, UK
Has thanked: 1 time
Been thanked: 8 times

Re: [DRIVING] 1978 VW T2 Camper

Post by DaveH »

New vacuum sensor from Citini (attached to the blue manifold). Works a treat - I am now getting about 7 seconds pump run time every 24 seconds, which may indicate a slight vacuum leak but it will do for now.
IMG_0231.jpeg
tom91
Posts: 1308
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 103 times
Been thanked: 216 times

Re: [DRIVING] 1978 VW T2 Camper

Post by tom91 »

Glad to see them in the wild, switches are quite finicky compared to a digital solution.
Founder Volt Influx https://www.voltinflux.com/
Webstore: https://citini.com/
Post Reply