Page 10 of 10
Re: Flying ADC 16 channel BMS 96S test
Posted: Tue Jul 08, 2025 2:55 pm
by PetersonOctavius
Proton wrote: ↑Tue Jul 08, 2025 2:50 pm
The 2.4 Version works no problems so far. still do not know how to make them balance. never seen them saying "balancing"
check all the down in the spot values tab. you ll see if the cells are being discharged of charged
Re: Flying ADC 16 channel BMS 96S test
Posted: Tue Jul 08, 2025 4:59 pm
by Proton
Quick update:
the boards have 12v all the time. When I turn the car on sometimes board 5 and 6 do not power on, sometimes just board 6 does not power on. I have to turn off the 12 v to all boards, then turn it back on and then turn on the car.
Re: Flying ADC 16 channel BMS 96S test
Posted: Tue Jul 08, 2025 7:38 pm
by johu
Proton wrote: ↑Tue Jul 08, 2025 4:59 pm
Quick update:
the boards have 12v all the time. When I turn the car on sometimes board 5 and 6 do not power on, sometimes just board 6 does not power on. I have to turn off the 12 v to all boards, then turn it back on and then turn on the car.
Ok, will test that but that if for after my holiday