storage project with nissan e-nv200 modules

[e4en1]

hello I am french and new to the forum
i would like to make a solar storage
my inverter is in 48vdc (acid or lithium battery) 100 amps Dc max battery
without canbus.

I have 25 nissan e-nv200 modules at 50 Ah

i would like to do in 14S (58.8vdc maximum)

I make 3 x 14S1P with 3 BMS with the possibility of troubleshooting / separating / adding
or
I make 1 x 14S3P with 1 BMS but if I have a problem with a cell I am blocked...

what do you advise him to do?
Thanks.

[e4en1]

good evening what would be your favorite BMS? Thanks

Daly, JIkong ..., ?

[johu]

Welcome!

good evening what would be your favorite BMS?

If you want to go open source: https://openinverter.org/wiki/16-cell_BMS

[e4en1]

Johu, thank you!
I will look at it , complicated for translation and level for me (I am not very experienced)
It’s super interesting!
Yes but can we wire in 14S?? I should find .

linux compatible great ?


for information
Am I open source?
for information looks at it;)
https://monnaie-libre.fr/ ( with a translator )