Hi every body.
In docs it's said that the pin SJ4 is for resolver feedback unipolar:
//
Alternatively Pin 1 and 3 can be connected to a sin/cos feedback device and Pin 4 can generate a resolver excitation sine wave. In that case Pin 2 provides 1.7V to make the resolver feedback unipolar.
//
What does it mean "resolver feedback unipolar" ? I didn't get it. I want to use EVB90380. Should I Connect SJ4 to a port in EVB90380 ?
SJ4 Pin in JP2 Pin Header in Main Board Version 3
- johu
- Site Admin
- Posts: 5842
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 164 times
- Been thanked: 1062 times
- Contact:
Re: SJ4 Pin in JP2 Pin Header in Main Board Version 3
No, this is just needed for actual resolvers as they output like +/-1V. Your chip likely outputs between 1-3V or something, so unipolar already
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9