Dacia Spring 27 kw and Fronius Symo Gen 24
Dacia Spring 27 kw and Fronius Symo Gen 24
Hello. I am trying to sniff data out of a 27 kw Dacia Spring pack so I can complete integration with a Fronius hybrid inverter. So far I managed to build a data extension cable and also bought a can reader out of aliexpress in order to use it with busmaster or savvycan. I did some work with rs485 in the past but limited knowledge with can protocol. Any guidance would be greatly appreciated. New to this forum so please be kind with my mistakes.
- uhi22
- Posts: 651
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 93 times
- Been thanked: 429 times
Re: Dacia Spring 27 kw an Fronius Symo Gen 24
Do you have the complete Spring or just the battery pack?
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22
Re: Dacia Spring 27 kw an Fronius Symo Gen 24
I have a car but thinking of buying a battery pack. Also have qualified people willing to help. Thanks.
Re: Dacia Spring 27 kw and Fronius Symo Gen 24
I have recently purchased a battery pack now waiting for can sniffing. Any assistance greatly appreciated...
-
- Posts: 17
- Joined: Tue Mar 14, 2023 7:11 pm
- Location: Sofia, BG
- Has thanked: 5 times
- Been thanked: 3 times
Re: Dacia Spring 27 kw and Fronius Symo Gen 24
Do you have a pinout of the battery data connector? Without a schematic, finding proper pins won't be easy.
But I don't understand if this battery is standalone or in the car.
But I don't understand if this battery is standalone or in the car.
Re: Dacia Spring 27 kw and Fronius Symo Gen 24
Sorry for the delay....I have schematics with proper pin out. i own both a car and a standalone battery.
Unfortunately I won't have my solar system installed until the end of summer....
Unfortunately I won't have my solar system installed until the end of summer....
- uhi22
- Posts: 651
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 93 times
- Been thanked: 429 times
Re: Dacia Spring 27 kw and Fronius Symo Gen 24
For the beginning, find out how many CAN busses go to the battery (hopefully 1). Find out the baud rate (with oscilloscope). Record some CAN traces (savvycan). Eg recording a complete short charging session and a short drive.
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22