Hello, for my Tesla powered speedboat project I would like to use the boost charging capability of the SDU inverter. I already have the motor spinning, low voltage only, using the Openinverter logic board.
I have read some comments already about this item, but one question still remains; does it matter to which phase I connect the HV positive from the rectifier?
Thank! Best regards, Frederik
SDU boost charging
- johu
- Site Admin
- Posts: 5789
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1023 times
- Contact:
Re: SDU boost charging
Yes, phase 2 is used for switching so that one you musn't use. So phase 1 or 3
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9