VW ID.3 62kwh Battery Pack Teardown

Forum on Volkswagen related hardware, so VW, Audi, Seat, Skoda etc.
Post Reply
User avatar
Gregski
Posts: 2273
Joined: Tue Sep 14, 2021 10:28 am
Location: Sacramento, California
Has thanked: 328 times
Been thanked: 450 times
Contact:

VW ID.3 62kwh Battery Pack Teardown

Post by Gregski »

this gentlemen does a proper 2021 VW ID.3 62kwh Battery Pack Teardown, hope you enjoy

Configuaration
  • 108 Cells
  • 450 Volts



VW ID.3 01.jpg
"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
User avatar
Gregski
Posts: 2273
Joined: Tue Sep 14, 2021 10:28 am
Location: Sacramento, California
Has thanked: 328 times
Been thanked: 450 times
Contact:

Re: VW ID.3 62kwh Battery Pack Teardown

Post by Gregski »

Testing the VW id3 battery module balance port, important to know before you buy any BMS to it.


"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
User avatar
Gregski
Posts: 2273
Joined: Tue Sep 14, 2021 10:28 am
Location: Sacramento, California
Has thanked: 328 times
Been thanked: 450 times
Contact:

Re: VW ID.3 62kwh Battery Pack Teardown

Post by Gregski »

Capacity test VW id3 id4 battery module


"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
User avatar
Gregski
Posts: 2273
Joined: Tue Sep 14, 2021 10:28 am
Location: Sacramento, California
Has thanked: 328 times
Been thanked: 450 times
Contact:

Re: VW ID.3 62kwh Battery Pack Teardown

Post by Gregski »

Open up a VW id3 id4 lithium battery module.




VW ID.3 03.jpg
VW ID.3 04.jpg
"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
arber333
Posts: 3265
Joined: Mon Dec 24, 2018 1:37 pm
Location: Slovenia
Has thanked: 80 times
Been thanked: 234 times
Contact:

Re: VW ID.3 62kwh Battery Pack Teardown

Post by arber333 »

Gregski wrote: Mon Nov 20, 2023 2:46 am Open up a VW id3 id4 lithium battery module.
.....
Yeah... i just managed to burn some fuses in my modules. I will have to cut those modules and then figure out how to fix them in place since i will be cutting the back flange off...
After i repair the fuse i intend to glue the block back but for sure it wont be able to carry 30kg!!!
Post Reply