Just do be clear, that I understood you correctly.
Further more I am a bit worried, as it is the 5V supply line of the micor , then running in parallel to the HV cables, to get disturbance.
Wouldn't be it better to have a poll down e.g. 2kohms mounted inside the inverter , so that I externaly just need to interrupt the line?Emergency Stop Wiring
- johu
- Site Admin
- Posts: 5791
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1025 times
- Contact:
Re: Emergency Stop Wiring
You could pull it up internally with 1k or so and pull it down externally for emergency stop
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Re: Emergency Stop Wiring
Like shown in the picture? What do you think of cutting the rs232 traces of and connecting the HVIL emergency stop except?
Re: Emergency Stop Wiring
I know chances are quite small , but how can I still protect the motor from a loose cable potentially destroying the sdu ?
- EV_Builder
- Posts: 1199
- Joined: Tue Apr 28, 2020 3:50 pm
- Location: The Netherlands
- Has thanked: 16 times
- Been thanked: 33 times
- Contact:
Re: Emergency Stop Wiring
Which cable? and if the chance is small why do it if the result is acceptable to the relationship of the occurrence?
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
see http://www.wdrautomatisering.nl for bespoke BMS modules.