If I have any more questions!
I will come to the forum for consultation!
Thank you all!
Help: The motor shakes, but does not turn! There is a lot of current!
Help: The motor shakes, but does not turn! There is a lot of current!
- Attachments
-
- params (1).json
- (1.46 KiB) Downloaded 48 times
-
- Posts: 46
- Joined: Fri Jul 26, 2019 8:06 pm
- Location: Bahrain
- Has thanked: 137 times
- Been thanked: 7 times
Re: Help: The motor shakes, but does not turn! There is a lot of current!
I by no means an expert, however I suggest you to provide more details on your setup (motor and inverter details) to allow others to help you
Prius gen3 inverter
Outlander rear motor
Pajero 1990
Outlander rear motor
Pajero 1990
- Bigpie
- Posts: 1595
- Joined: Wed Apr 10, 2019 8:11 pm
- Location: South Yorkshire, UK
- Has thanked: 75 times
- Been thanked: 305 times
Re: Help: The motor shakes, but does not turn! There is a lot of current!
Are you sure your motor phase wires are the correct order?
VW Beetle 2003
Outlander front generator
Prius Gen 3 inverter (EVBMW logic board)
Outlander charger
3x Golf GTE batteries
Chademo Charging
Outlander water heater
Outlander front generator
Prius Gen 3 inverter (EVBMW logic board)
Outlander charger
3x Golf GTE batteries
Chademo Charging
Outlander water heater
Re: Help: The motor shakes, but does not turn! There is a lot of current!
I have already solved this problem!
thank you!
But now I realize that my current sensor is not working! The voltage is normal!
1.6v。 But there has been no change in the data of il1 and il2!
And after I refueled, he remained in idle mode!
I can't control any speed!
thank you!
But now I realize that my current sensor is not working! The voltage is normal!
1.6v。 But there has been no change in the data of il1 and il2!
And after I refueled, he remained in idle mode!
I can't control any speed!
- johu
- Site Admin
- Posts: 5812
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 162 times
- Been thanked: 1042 times
- Contact:
Re: Help: The motor shakes, but does not turn! There is a lot of current!
Please don't delete your original question as then it's less helpful for others and also report back how you solved the problem
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9