CCS connectors pinout

Development and discussion of fast charging systems eg Chademo , CCS etc
Post Reply
alexbeatle
Posts: 155
Joined: Sun Jan 03, 2021 6:12 am
Has thanked: 46 times
Been thanked: 15 times

CCS connectors pinout

Post by alexbeatle »

Hello, folks.
I'm sure it's a silly question, but maybe somebody wonders about the same...
Could somebody please settle the correct CCS pinout for me? The pinouts in the below 2 options are mirrored - some show DC+ on the right, others - DC+ on the left. Similar goes for the CP and PP signals.
All pictures below are or the sockets\inlet\vehicle side.

I think it should be option 1.

Option 1:
image.png
image.png
image.png
image.png
Option 2:
image.png
image.png
Top
User avatar
uhi22
Posts: 601
Joined: Mon Mar 14, 2022 3:20 pm
Location: Ingolstadt/Germany
Has thanked: 91 times
Been thanked: 413 times

Re: CCS connectors pinout

Post by uhi22 »

Looking from outside to the vehicle inlet, on the right side is DC+ and CP. This is what I can confirm from various CCS2 test setups. This would match option 1 above.
Top
Post Reply

Return to “Charging”