Hi,
Is it possible to command the SME / Safety Box of an i3, using CAN?
(Similar to the solution from Damien with the BMW PHEV SBox)
Does they use the same circuit in the boxes?
The connector on the i3 cable has 2x8 pins
Edit: 2x6pins has the white connector.
Thank you
i3 SME / Safety Box using CAN?
- muehlpower
- Posts: 579
- Joined: Fri Oct 11, 2019 10:51 am
- Location: Germany Fürstenfeldbruck
- Has thanked: 12 times
- Been thanked: 104 times
Re: i3 SME / Safety Box using CAN?
It can definitely be controlled. It sends 6 CAN messages and receives 15+ messages. CAN high is on A191-1B pin 4, CAN low is on pin 10, GND on pin 2, Kl30 on pin 7, Kl15 on pin 9.
- mnmn
- Posts: 26
- Joined: Mon Apr 17, 2023 6:30 pm
- Location: Budapest, Hungary
- Has thanked: 17 times
- Been thanked: 3 times
Re: i3 SME / Safety Box using CAN?
Great news thank you very much!
I guess, these commands are not the same, as for the PHEV, right?
Can you give me some more info about them?
Thank you very much in advance.
I guess, these commands are not the same, as for the PHEV, right?
Can you give me some more info about them?
Thank you very much in advance.
EV-FAN
- muehlpower
- Posts: 579
- Joined: Fri Oct 11, 2019 10:51 am
- Location: Germany Fürstenfeldbruck
- Has thanked: 12 times
- Been thanked: 104 times
Re: i3 SME / Safety Box using CAN?
SME sends: 2F5h,431h,239h,432h,1FAh,112h
SME receives: 2CAh,2F5h,3F9h,397h,3E8h,380h,3A0h,37Bh,1A1h,108h,330h,12Fh,3E9h,432h,3CAh,328h,30Bh,19Bh,1B9h
you can find the IDs marked in red in the LIM tread
SME receives: 2CAh,2F5h,3F9h,397h,3E8h,380h,3A0h,37Bh,1A1h,108h,330h,12Fh,3E9h,432h,3CAh,328h,30Bh,19Bh,1B9h
you can find the IDs marked in red in the LIM tread