Hi!
Is it anyone who can share a working set of parameters for the LDU sport unit?
Im quite new at tuning and Im looking in to getting a little head start
Thanks in advance!
Share parameters?
- bexander
- Posts: 835
- Joined: Tue Jun 16, 2020 6:00 pm
- Location: Gothenburg, Sweden
- Has thanked: 63 times
- Been thanked: 89 times
Re: Share parameters?
Seem like these parameters are a bit old but might get you going.
https://openinverter.org/parameters/
Try the search function on the forum as well, specially in the Tesla section.
https://openinverter.org/parameters/
Try the search function on the forum as well, specially in the Tesla section.
-
- Posts: 772
- Joined: Tue Sep 17, 2019 8:33 pm
- Location: Raleigh, NC, USA
- Has thanked: 96 times
- Been thanked: 96 times
Re: Share parameters?
Here are the two Tesla parameter threads:
viewtopic.php?t=195&hilit=parameter+thread
viewtopic.php?t=126&hilit=ldu+tuning
I'd generally say start with Jon Volk's tune, and tweak from there. I believe the set attached here is his most recent. If I remember correctly he was on a base LDU, but its probably a good starting point for your Sport LDU as he was right to the limit of what a base can take.
I've also attached my most recent parameter dump (just called params). On my base LDU, I'm still having an overcurrent issue when going WOT with a full battery pack. I'm still trying to find a tune that eliminates that while maintaining the violence. There is a chance I've got some inverter damage, but unknown at this time. This was on firmware v5.20
viewtopic.php?t=195&hilit=parameter+thread
viewtopic.php?t=126&hilit=ldu+tuning
I'd generally say start with Jon Volk's tune, and tweak from there. I believe the set attached here is his most recent. If I remember correctly he was on a base LDU, but its probably a good starting point for your Sport LDU as he was right to the limit of what a base can take.
I've also attached my most recent parameter dump (just called params). On my base LDU, I'm still having an overcurrent issue when going WOT with a full battery pack. I'm still trying to find a tune that eliminates that while maintaining the violence. There is a chance I've got some inverter damage, but unknown at this time. This was on firmware v5.20
- Attachments
-
- params.json
- (1.49 KiB) Downloaded 41 times
-
- JonVolk TESLA_PARAMS 2022-05-29.json
- (1.47 KiB) Downloaded 50 times
If at first you don't succeed, buy a bigger hammer.
1940 Chevrolet w/ Tesla LDU - "Shocking Chevy" - Completed 2023 Hot Rod Drag Week
1940 Chevrolet w/ Tesla LDU - "Shocking Chevy" - Completed 2023 Hot Rod Drag Week
Re: Share parameters?
Thanks for the replies! Will upload them and tune after that!
Best Regards
Joachim Westerlund
Joachim Westerlund
- catphish
- Posts: 955
- Joined: Fri Oct 08, 2021 11:02 pm
- Location: Dorset, UK
- Has thanked: 94 times
- Been thanked: 179 times
Re: Share parameters?
On the topic of shared Tesla paramaters, please can someone (ie johu) change the tripmode on the official SDU and LDU paramaters? The current defaults are almost definitely responsible for some damaged hardware.
- Bratitude
- Posts: 784
- Joined: Thu Jan 02, 2020 7:35 pm
- Location: Canada
- Has thanked: 59 times
- Been thanked: 176 times
- Contact:
Re: Share parameters?
Sad nobody uses the pram data base
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
- catphish
- Posts: 955
- Joined: Fri Oct 08, 2021 11:02 pm
- Location: Dorset, UK
- Has thanked: 94 times
- Been thanked: 179 times
Re: Share parameters?
Unfortunately the param database is quite broken. I was planning to fix it but just never got time to do so
- Bratitude
- Posts: 784
- Joined: Thu Jan 02, 2020 7:35 pm
- Location: Canada
- Has thanked: 59 times
- Been thanked: 176 times
- Contact:
Re: Share parameters?
its such a good idea, the potential is there. forum sharing is such a mess
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
- johu
- Site Admin
- Posts: 5791
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1025 times
- Contact:
Re: Share parameters?
Yes, could use a rewrite. Would prefer more server side, less js.
https://github.com/jsphuebner/parameter-database
tripmode updated.
https://github.com/jsphuebner/parameter-database
tripmode updated.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9