Coding Options (VCDS/PIWIS/ODIS)
The MLBevo chargers seem to all use the
EV_OBC3Phase1KLOMLBev16B config/odx
I primarily use Porsche PIWIS tools, and since the Taycan uses a similar charger, the engineering and coding options match up.
Other similar tools that can be found are VCDS, iDex, ODIS Engineering & OBDEleven... All should allow modifying the charger coding.
I've created a VCDS Label file to aid in coding, It's attached.
You can open in the VCDS LCode.exe program (no purchase needed) and it's a interactive way to determine the coding value required.
The coding breakdown is listed below:
Bitfield 0 -
CP standard - SAE/
vehicle category - Electric Vehicle / Hybrid
20kW charger
AC charging socket B
AC charging socket A
PLC charging socket B
PLC charging socket A
DC Charging - Chademo
Bitfield 1 -
Country encoding (NAR/
HV activation auxiliary contactor
Charging socket resistor B
Charging socket resistor A
AWC installed -
Wireless charging
Number of AC chargers (One/Two)
Bitfield 2 -
Mobile Online Services (MOD)
Sub-Grid operation
Charging cover lock (charging socket B)
Charging cover lock (charging socket A)
HV activation DC charging read back
Maximum charging current (63A)
Bitfield 3 -
Charging cover lock detection (charging socket B)
Charging cover lock detection (charging socket A)
Plug lock DC charging socket
iWWT -
Integrated water heat exchanger?
Type of connector lock detection - Limit Switch
Plug lock (charging socket A)
Brand/Marque (VW/Audi/Porsche)
Bitfield 4 -
Plug and Charge (PnC)
Power Line Communication
Settings Clear error memory
HV charge booster (400v->800v)
Charging button module
Second charging button
Local HV interlock
stimulus line installed
Bitfield 5 -
Variant coding 11 kW (reserve)
Parking Heater
Kessy
Diagnostic resistor loading button
LED 4 (DC/Combo)
LEDs DC/Combo
LED 4 (AC)
Bitfield 6 -
DC China socket installed
Installed DC combo box
Intelligent charging socket installed (LIN socket)
Installation status of DC charging socket B
Installation status of DC charging socket A
Two charger can B
Charging button module socket B
Diagnosis resistance charging button socket B
Bitfield 7 -
Installation location DC charging socket
The VCDS Scan for my charger is as follows:
My LCode Lable File looks like this:
You can download LCode from Here:
https://forums.ross-tech.com/index.php? ... 117/page-7
Coding label is uploaded as a TXT file, Rename to .xpl or .lbl to open