I have a couple of new IVT-S shunts available from a past order I can part with. They are the 1000A version, non-terminated CAN, 3 voltage measuring inputs. (Exact same version as listed in Bratitude's link).
For simplicity's sake : I'll let them go at the same cost proposed earlier : 165EUR each, shipped to most countries. PM me for confirmation and availability.
You will have to source your own set of Molex connectors/clips as I do not have any of these left. (see mdrobnak's post in this thread) Speaking of these Molex connectors, if you are in a hurry while building your system, I can confirm that I was able to use a couple of slightly modified spare JST PH 2.0mm connectors to use with IVT-S shunts, as a temporary connexion, while the right connectors were stuck in the mail.
Isabellenhütte IVT-S shunts available
- larsrengersen
- Posts: 102
- Joined: Tue May 28, 2019 9:42 am
- Has thanked: 9 times
- Been thanked: 22 times
Re: Isabellenhütte IVT-S shunts available
That is a very nice deal! Better than what I could offer.
For those who are still awaiting my 500A delivery and want to switch, I'll accept that.
I will e-mail those people directly too.
- pablo_mtl
- Posts: 35
- Joined: Wed Oct 07, 2020 11:30 pm
- Location: Canada
- Has thanked: 3 times
- Been thanked: 2 times
Re: Isabellenhütte IVT-S shunts available
I'm sorry, my goal really was not to undersell your group-purchase. And now I also realized that this thread wasn't a general IVT-S one, it was about another fellow forum member sourcing these shunts. I should have started another thread in classified.larsrengersen wrote: ↑Fri Jan 08, 2021 10:13 pm That is a very nice deal! Better than what I could offer.
Hope you guys don't mind too much.
- larsrengersen
- Posts: 102
- Joined: Tue May 28, 2019 9:42 am
- Has thanked: 9 times
- Been thanked: 22 times
Re: Isabellenhütte IVT-S shunts available
I don’t over here it’s about what’s in best interest for the members of the forum in these cases.
In my case my win already is that I now stock the shunts and the connector kits.
Re: Isabellenhütte IVT-S shunts available
Hello, I am also looking for CAN dbc file for IVT-S-100-UB-I-CAN2-12/24. Could please help me? I have mailed to the company, but no reply.
It would be really helpful if somebody could help me
- jnsaff
- Posts: 176
- Joined: Fri Oct 18, 2019 7:42 am
- Location: Tallinn, Estonia
- Has thanked: 2 times
- Been thanked: 8 times
Re: Isabellenhütte IVT-S shunts available
The DBC has been shared numerous times on internet and I'd guess on this forum too.
This here should be correct https://github.com/gabryelreyes/IVT-S/b ... AN_DBC.dbc the parent project has code to make comms easier too.
If this does not work I can dig up the version they sent me for comparison.
This here should be correct https://github.com/gabryelreyes/IVT-S/b ... AN_DBC.dbc the parent project has code to make comms easier too.
If this does not work I can dig up the version they sent me for comparison.