Hi,
I have come across this decode data from what is exchanged between vehicle and EVSE im sure its probably on the forum somewhere but i thought i would add it again just incase.
Hope this helps
Table F.3 – The physical/data link layer specifications for system A
Communication protocol ISO 11898-1 and ISO 11898-2 The extension bit (12 − 29 bit) is not used.
Transmission rate (kbps) 500
Cycle 100 ms ± 10 %
CHAdeMO Canbus decode DC Fast Charging
-
- Posts: 78
- Joined: Thu Jan 28, 2021 6:15 pm
- Has thanked: 1 time
- Been thanked: 6 times
- johu
- Site Admin
- Posts: 5788
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1022 times
- Contact:
Re: CCS Canbus decode DC Fast Charging
Looks much like CHAdeMO to me
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
- uhi22
- Posts: 598
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 90 times
- Been thanked: 411 times
Re: CCS Canbus decode DC Fast Charging
Yes, this is CAN bus (Chademo uses CAN), not CCS (which uses powerline/homeplug). Regarding the real CCS, I collected some references in github.com/uhi22/pyPlc.
I would vote to change "CCS" to "Chademo" in the headline.
I would vote to change "CCS" to "Chademo" in the headline.
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22