Chevy Volt Gen 2 charger 24281923

Discussion about components from Ampera/Bolt and the PSA group which owns Opel these days
lukes
Posts: 7
Joined: Sun Mar 06, 2022 12:56 am

Re: Chevy Volt Gen 2 charger 24281923

Post by lukes »

PM'd
lukes
Posts: 7
Joined: Sun Mar 06, 2022 12:56 am

Re: Chevy Volt Gen 2 charger 24281923

Post by lukes »

For anyone looking to use this, the output connector can be found on:
General Motors p/n 84024993
Tesla p/n 1100169-00-D, or 110900410-G (?)
Check the key of the connector, whatever part you buy. Only Key A will work!!!

I’m told theres also a volvo harness with this connector, but I don’t know the part number.
User avatar
vwbrady
Posts: 228
Joined: Mon Dec 16, 2019 1:18 am
Location: Seattle, WA

Re: Chevy Volt Gen 2 charger 24281923

Post by vwbrady »

any key will work with a little trimming :P
86elcamino
Posts: 48
Joined: Thu Apr 15, 2021 12:06 am
Location: Lake Jackson, Tx
Has thanked: 1 time

Re: Chevy Volt Gen 2 charger 24281923

Post by 86elcamino »

arber333 wrote: Fri Aug 19, 2022 6:02 am DcDc can be connected to HV directly. If you show it PWM it starts with 14V. But if you remove PWM it will revert to 13.6V as a failsafe.

Charger will require 100Hz PWM signal to run and BMS to stop it when pack is full.
I bet you could get zombieverter to output 2x PWM signals for you...
Thanks for the input. Do you know how to get the Zombieverter to output the PWM signals? Do you know what is required for the Volt Gen 2 BMS to operate? Sorry if these are silly questions, my electronics knowledge is limited, I appreciate you sharing yours.
Post Reply