after building the v3 inverter of johu, it is time to test and I found a big jitter (well really not me but a friend that is helping to me).
We found that the real-time clock oscillator, the 32.768 kHz oscillator of the olimex is 0 hz... so my question is if this is working as long as it has power?
searching where my jitter comes
- johu
- Site Admin
- Posts: 5789
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1023 times
- Contact:
Re: searching where my jitter comes
Not 100% what you built, but the RTC oscillator is never used in any software
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
-
- Posts: 103
- Joined: Mon Feb 22, 2021 3:25 pm
- Location: Spain
- Has thanked: 42 times
- Been thanked: 4 times
Re: searching where my jitter comes
sorry, i mean V2 openinverter board
We keep searching the jitter origin.
We keep searching the jitter origin.
- johu
- Site Admin
- Posts: 5789
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1023 times
- Contact:
Re: searching where my jitter comes
I see. Well there is a 32 kHz crystal on there but it won't swing, as it's not activated by software.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9