hello
I have a purpose for this new year, to definitely start my evo conversion.
I has the mainboard v2 kit with LEM sensor from johannes and revisiting the web I find this broken link which would be nice to have again online.
https://openinverter.org/docs/index.htm ... ds,33.html
the broken link is the one that would redirect to sensor with LEM component.
thanks
broken link , please johannes Topic is solved
- johu
- Site Admin
- Posts: 5812
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 162 times
- Been thanked: 1042 times
- Contact:
Re: broken link , please johannes
Must be browser dependent (some special characters in the link). It works here.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
-
- Posts: 905
- Joined: Fri Apr 26, 2019 5:40 pm
- Has thanked: 296 times
- Been thanked: 182 times
Re: broken link , please johannes
I dunno if this will help, but, in case it's the clicking of the link, not the going-to of the webpage that's tripping you up, here's a tinyurl of the same link above:
https://tinyurl.com/4n8afmf2
https://tinyurl.com/4n8afmf2
-
- Posts: 103
- Joined: Mon Feb 22, 2021 3:25 pm
- Location: Spain
- Has thanked: 42 times
- Been thanked: 4 times
Re: broken link , please johannes
problem partially solved.
i was expecting the link to the LEM sensor, but aparently only there is a link to TAMURA sensor very similar.
I was confused with the word here " ...Go here for information about the legacy Tamura/LEM sensor boards. ..." normally word "here" is itself the link , but not in this case. The link is in the title
So closing thread. thanks
i was expecting the link to the LEM sensor, but aparently only there is a link to TAMURA sensor very similar.
I was confused with the word here " ...Go here for information about the legacy Tamura/LEM sensor boards. ..." normally word "here" is itself the link , but not in this case. The link is in the title
So closing thread. thanks