Main relay opening when throttle signal [SOLVED]
- qmedia2651
- Posts: 56
- Joined: Tue Oct 06, 2020 4:13 am
- Location: Orlando Florida, USA
Main relay opening when throttle signal
My main relay is cutting off when sending throttle signals.
341 dc at battery pack
Udc = 416v
Udcsw set to 80% of 341 =275v
BMW E46 pedal
Tesla SDU Logic board v5 open inverter organization board.
Every thing okay except cuts off my main relay.
Some times the motor makes a sound to spin
Any body had this problem before.
Please advise. Thanks
341 dc at battery pack
Udc = 416v
Udcsw set to 80% of 341 =275v
BMW E46 pedal
Tesla SDU Logic board v5 open inverter organization board.
Every thing okay except cuts off my main relay.
Some times the motor makes a sound to spin
Any body had this problem before.
Please advise. Thanks
-
- Posts: 3283
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 80 times
- Been thanked: 239 times
- Contact:
Re: Main relay opening when throttle signal
Is it possible voltage measurement would drop so low inverter would open contactor? Or raise reference above GND?qmedia2651 wrote: ↑Fri Dec 31, 2021 8:13 pm My main relay is cutting off when sending throttle signals.
Try setting UDCSW voltage set to 60Vdc. Maybe that would cure the problem. Also try to record the graph of UDC measurement when applying throttle. You may find out your problem is voltage reference on the STM32 chip.
- johu
- Site Admin
- Posts: 5842
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 164 times
- Been thanked: 1062 times
- Contact:
Re: Main relay opening when throttle signal
Nope, undervoltage does not open the contactor.
It is most likely an overcurrent event or desat. What are your parameters? Please attach json file that you can download from the web interface.
Personally I'd raise udcsw to 320V or so.
It is most likely an overcurrent event or desat. What are your parameters? Please attach json file that you can download from the web interface.
Personally I'd raise udcsw to 320V or so.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
- qmedia2651
- Posts: 56
- Joined: Tue Oct 06, 2020 4:13 am
- Location: Orlando Florida, USA
Re: Main relay opening when throttle signal
Here is the Parameter file.
- Attachments
-
- params.json
- (1.45 KiB) Downloaded 76 times
- qmedia2651
- Posts: 56
- Joined: Tue Oct 06, 2020 4:13 am
- Location: Orlando Florida, USA
Re: Main relay opening when throttle signal
Johu here are some pics of the web parameters
with no voltage applied.
with no voltage applied.
- johu
- Site Admin
- Posts: 5842
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 164 times
- Been thanked: 1062 times
- Contact:
Re: Main relay opening when throttle signal [SOLVED]
You have default parameters loaded, please use the "Download File" button here: https://openinverter.org/parameters/view.html?id=15 and then the "Upload parameters" on you web interface. Then save to flash. I'm guessing something in the configuration makes it trip.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
- qmedia2651
- Posts: 56
- Joined: Tue Oct 06, 2020 4:13 am
- Location: Orlando Florida, USA
Re: Main relay opening when throttle signal
OK Johu thanks a lot will do take care.
will try this out.
I am using V5.14R
will try this out.
I am using V5.14R
- qmedia2651
- Posts: 56
- Joined: Tue Oct 06, 2020 4:13 am
- Location: Orlando Florida, USA
Re: Main relay opening when throttle signal
Johu !! good news uploaded the parameters calibrated the throttle and WOW I hit the throttle to much the motor lifted from the front and knocked my level off.
Motor is working Thanks a lot goanna have to Patronize for the good help and learning.
Thanks very one.
Motor is working Thanks a lot goanna have to Patronize for the good help and learning.
Thanks very one.
- johu
- Site Admin
- Posts: 5842
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 164 times
- Been thanked: 1062 times
- Contact:
Re: Main relay opening when throttle signal
Great
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
- qmedia2651
- Posts: 56
- Joined: Tue Oct 06, 2020 4:13 am
- Location: Orlando Florida, USA