mea culpa mea culpa, total Arduino / VCU newb here
My ver 2 VCU (as in not ZombieVerter) running ver 3.01 of the software advertises itself WiFishly as the gs450h_vcu SSID
I am just wondering where is that coming from, as it is not in the GS450H_WiFi_V1.ino sketch
Where is the gs450h_vcu SSID coming from? [SOLVED]
- Gregski
- Posts: 2334
- Joined: Tue Sep 14, 2021 10:28 am
- Location: Sacramento, California
- Has thanked: 355 times
- Been thanked: 474 times
- Contact:
Where is the gs450h_vcu SSID coming from?
"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
- catphish
- Posts: 955
- Joined: Fri Oct 08, 2021 11:02 pm
- Location: Dorset, UK
- Has thanked: 94 times
- Been thanked: 179 times
Re: Where is the gs450h_vcu SSID coming from? [SOLVED]
It's stored in flash on the ESP8266. The web interface has a page where you can set the SSID and password.
- Gregski
- Posts: 2334
- Joined: Tue Sep 14, 2021 10:28 am
- Location: Sacramento, California
- Has thanked: 355 times
- Been thanked: 474 times
- Contact:
Re: Where is the gs450h_vcu SSID coming from?
Oh man, is it this unintuitive Admin page, I was actually on it and thought that's a lot of effort just to change the background, ha ha, didn't even think of poking at the SSID section on this page, thank you so much for your help
"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg