Made 3D model of the aluminium frame for the battery modules.
It's made of standard aluminium square tube, 15x50mm and 15x25mm for side. And 20x80mm for end.
It's 11 modules in the back and 3 in front.
Step file:
This is how it looks half way:
Details of the HV connections:
And almost finished:
Tesla battery pack build
Tesla battery pack build
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
Re: Tesla battery pack build
This is how it looks with the lid on.
And yes it will fit inside
Here you can see, there is room for more batteries. (Original led acid pack)
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"